Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.
We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!
Has anybody else had issues with the WFR after upgrading to this current firmware version? Ours (first our original Pro and then the Home that they sent us in case it was a bad upgrade) reboot themselves at least once a day. I'm working with Evan to figure out what to do next but wanted to check and see if anybody had the issue and found a solution. I've tried all the various power cycling and/or factory reset that I would normally recommend in a situation such as this but with no results.
I've also got an issue where I can't see my WFRBoost on the roof; but Evan thinks that's just an "it needs the paperclip reset" issue and I can't get up there to try that until I get over my broken foot. I've disabled and unplugged the Boost from the WFR and that had no effect on the WFR even though I redid all the power cycling/reset stuff after the boost was disconnected.
