Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.
We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!
Just got a nifty little shortwave (crank & solar powered +) It just has a "whip" antenna you pull out, no input for an external antenna. Looking on Google, most say to wrap a long (20-50 ft) wire around the antenna, then put it out the window up to a tree. But does anyone have any ideas how to adapt it to the coaxial plugs that go to the Winegard antenna? And is that possible? Is a Winegard antenna compatible with something like this? What about stripping a coax then soldering it to a wire? Any mad scientists with any ideas? Thanks!
They would not be compatible. If I remember right, the Winegard is only for television, which would be VHF and UHF type signals. The signals that a short-wave radio receives is simply AM. That is why they recommend the long-wire antenna.
However, it might be possible to attach one's long-wire antenna around the perimeter of the RV in some way and still pick up signals. That way, it could be left in place instead of being required to install between trees and then taken down when planning to travel.
There are more knowledgeable people here that can better answer the question, but I think a long-wire antenna would need to be placed in such a manner that it was not touching itself at any point or that it was touching other metal.
Also, keep in mind that that long wire antenna on a roof "might" serve as an attraction for lightning. (That part is pure speculation on my part because I would think it needed to be grounded to attract lightning. Then again, lightning does funny things.)
Terry
__________________
Terry and Jo
2010 Mobile Suites 38TKSB3 2008 Ford F450 2019 Ford Expedition Max as Tag-along or Scout
Won’t work at all.The long wire antenna is what is required for shortwave.Actually a long wire antenna is a very good antenna for the low frequency wave of “shortwave” radio.
(Your FM radio is connected to the Winegard, but FM radio is very close to the low-band TV channels so it works for FM radio.Shortwave is a long way from the frequencies used for commercial FM stations.)
Bill
-- Edited by Bill and Linda on Tuesday 1st of May 2012 12:28:26 PM
Good thoughts, thanks. I thought the Winegard might help, because when I put it up, my radio reception got much better (I don't have a TV) so I thought the radio was hooked into it too. I guess I'll figure a way to put a wire out, but I think the Winegard looks more like a lightening rod, so I'm not too worried!
My kitchen screen slides open, so I can throw it out there, and string a wire along the awning.
Jane
You may want to read the manual for additional info, but in general, you will get the best results if you don’t place the antenna right up against other pieces of metal.Sometimes tying the antenna to a tree is a good mounting point.Just see if the manual doesn’t have some suggestions.Have fun “DXing” which is the old term for receiving radio stations far away from you “QTH” which is also radio slang for your current location or home.
Does the pull out antenna not work? Most radio's don't do well inside rigs. Just about anything mounted outside the rig will increase reception. If you find the pull out antenna does not work, best bet would be to open up the radio and replace the antenna with a connector to allow you to hook up an external antenna. Many places sell SW receive-only antenna's that are smaller and easier to setup/take down than a long wire.
__________________
2018 Thor Windsport 35M -- 2018 Camry Toad
-- USAF Retired -- Full-timing since December 2007 - Part-Timing since July 2011
Yes, the pull out antenna works great for FM, pretty good for the weather channels inside the rig, but nothing but static for the shortwave. I've seen some nice little antennas, and I have a length of speaker wire, just got to get around to it.
Just got a nifty little shortwave (crank & solar powered +) It just has a "whip" antenna you pull out, no input for an external antenna. Looking on Google, most say to wrap a long (20-50 ft) wire around the antenna, then put it out car dvd players the window up to a tree. But does anyone have any ideas how to adapt it to the coaxial plugs that go to the Winegard antenna? And is that possible? Is a Winegard antenna compatible with something like this? What about stripping a coax then soldering it to a wire? Any mad scientists with any ideas? Thanks!
Jane
hey it looks nice antenna. What is your review about it if I want to purchase it?
-- Edited by Torldyn on Sunday 10th of February 2013 05:53:21 AM
So Hina, you might get a little boost out of the TV antenna becausel it is outside and high, but I wouldn't count on much. The frequency of the signal determines the optimum length of the antenna. The lower the frequency of the signal, the longer the wavelength and so the longer the antenna needs to be. A 20 to 50 foot wire would be your best bet. Keep in mind that the weather and shortwave bands on many of these little radios is almost never used so the manufacturer doesn't spend any time making them perform well. In some cases they barely work at all.
__________________
MarkS & Jackie MSgt, USAF, Ret 2004 Volvo 780 530 HP Cummins 13 speed 2014 Trilogy 3650RE fulltime since Oct 8, 2016