Anyone know how to remove/replace these LED touch lights? I cannot find a way to take the old ones out.
Terry and Jo said
08:17 PM Dec 21, 2019
Without seeing how they are installed within the RV, I'm guessing. We have lights that are flush with an under cabinet installation or in the ceiling. With ours, we have to pull down on the fixture, which allows one to hold onto the base. If you are removing them entirely, you may need to try that and see if they can be completely removed for replacement or whatever. If you are wanting to simply replace the "bulb," then holding the base and twisting the "cover" may gain access to the area for the "bulb."
Terry
Jim and Barb said
08:32 PM Dec 21, 2019
Thanks, I will give those ideas a try.
arcaguy said
09:30 AM Dec 22, 2019
I'll second what Terry said, there has to be a way to take them out, someone put them in and it's a rare bird where things are installed without a way to service them. Please let us know what you find, 'cause I'm sure someone else has or will have the same issue.
Neil and Connie said
12:30 PM Dec 22, 2019
What Terry said. We have similar ones in our New Horizons and the dome cover comes off...which lets us change the bulbs as ours are not LED...and also reveals the screws holding it up. There could also be some sort of spring clip on the back side that compresses than expands once it is pushed into the hole.
Terry and Jo said
07:38 PM Dec 22, 2019
Sorry. I forgot to mention what Neil did. If completely removing, there is some kind of mechanism that is spring-loaded to hold the fixtures in place once it has been pressed into the cavity in which it is to rest.
I couldn't get the image to post, but this one may be the more modern style of light fixture.
Anyone know how to remove/replace these LED touch lights? I cannot find a way to take the old ones out.
Without seeing how they are installed within the RV, I'm guessing. We have lights that are flush with an under cabinet installation or in the ceiling. With ours, we have to pull down on the fixture, which allows one to hold onto the base. If you are removing them entirely, you may need to try that and see if they can be completely removed for replacement or whatever. If you are wanting to simply replace the "bulb," then holding the base and twisting the "cover" may gain access to the area for the "bulb."
Terry
What Terry said. We have similar ones in our New Horizons and the dome cover comes off...which lets us change the bulbs as ours are not LED...and also reveals the screws holding it up. There could also be some sort of spring clip on the back side that compresses than expands once it is pushed into the hole.
Sorry. I forgot to mention what Neil did. If completely removing, there is some kind of mechanism that is spring-loaded to hold the fixtures in place once it has been pressed into the cavity in which it is to rest.
I couldn't get the image to post, but this one may be the more modern style of light fixture.
Amazon RV Light Fixtures
I think that ours may be more like this next one.
Terry