There is plenty of info about re stringing day night shades on this forum and youtube. But how do you get these things off ? Mine do not have clips and are under a valance. Any suggestions?
bjoyce said
08:45 AM Feb 27, 2016
They are probably on some kind of clip. To remove ours, I would grip the top section with both hands apart and rotate my hands forward, rotating the top like a drive shaft.
Neil and Connie said
08:56 AM Feb 27, 2016
Bill's right…if they're MCD then there are little clips; if you feel up around the top front and back edge you'll find them and they pop out. I imagine other brands use a similar attachment method.
igotjam said
10:39 AM Feb 27, 2016
I,ve had the clip type but my current ones are screwed to the wall at the top. In order to get them down you need to take off the valences which are brad nailed to the window trim, (not easy and leaves holes in wood valences) and then unscrew the blind from the wall. The rv builder really took the lazy way out on putting these up.
Big Mike said
04:24 PM Feb 27, 2016
There are no clips. They must be screwed into the valances. Sucks!
There is plenty of info about re stringing day night shades on this forum and youtube. But how do you get these things off ? Mine do not have clips and are under a valance. Any suggestions?
Bill's right…if they're MCD then there are little clips; if you feel up around the top front and back edge you'll find them and they pop out. I imagine other brands use a similar attachment method.
There are no clips. They must be screwed into the valances. Sucks!