Can anyone tell me where water turn on is for icemaker in 2009 select suites ?
Terry and Jo said
09:15 PM Aug 3, 2014
Marlin,
I answered via your private message.
Keep in mind that if you are asking a question of a specific model, you might use "Community Chat" or one of the other categories instead of "Ask Howard." Howard and Linda don't have a DRV Suites model, so they might not have known how to answer your question.
Terry
lmcallis said
06:03 AM Aug 5, 2014
Gilljr, can't tell you where to look on a DRV 5er but I would suggest you look at the outside opening for the refrigerator. There you should see a clear 1/4 inch water line that comes from somewhere, goes to a water valve solenoid (mine is blue plastic and has a couple of wires hooked to it and a water in and out connection), and then goes up the refrigerator to where the ice maker connection is.
If you can tell where the 1/4 inch line that goes to the solenoid comes from, that will give you an idea where to look. Mine goes through a hole in the board that the refrigerator sits on. That told me to go inside the 5er and take off the board covering an open space under the refrigerator, and sure enough, right in that space was where they had tapped into the water line running to the sink, and installed the ice maker water shut off valve.
Can anyone tell me where water turn on is for icemaker in 2009 select suites ?
Marlin,
I answered via your private message.
Keep in mind that if you are asking a question of a specific model, you might use "Community Chat" or one of the other categories instead of "Ask Howard." Howard and Linda don't have a DRV Suites model, so they might not have known how to answer your question.
Terry
Gilljr, can't tell you where to look on a DRV 5er but I would suggest you look at the outside opening for the refrigerator. There you should see a clear 1/4 inch water line that comes from somewhere, goes to a water valve solenoid (mine is blue plastic and has a couple of wires hooked to it and a water in and out connection), and then goes up the refrigerator to where the ice maker connection is.
If you can tell where the 1/4 inch line that goes to the solenoid comes from, that will give you an idea where to look. Mine goes through a hole in the board that the refrigerator sits on. That told me to go inside the 5er and take off the board covering an open space under the refrigerator, and sure enough, right in that space was where they had tapped into the water line running to the sink, and installed the ice maker water shut off valve.
Good luck
Lance