Have not been able to get a message posted on Evergreen site. Need help:
My black water exit valve is broken(pin is stripped out with valve closed).
I am looking to purchase a replacement slide. And also a cap to replace the end cover to the outside.
My plans are to cut off the end cap then retrieve the slide by means of possibly drill and tap. then insert a rod to open the slide.
After opening, I will require the replacement parts.
Question; Where to I purchase replacement parts for my problem?
regards
Roland Kuehne
Lucky Mike said
11:50 AM Mar 8, 2014
your waste slides are bolted in place.....no cutting needed....any camper supply or walmart will have a new gate valve assembly!!!.......
it is a generic part
bring rubber gloves and a bucket of some sort.....its a crappy job!! but takes a small wrench and screwdriver and about a half hour of your time
Alie and Jims Carrilite said
11:55 AM Mar 8, 2014
If I understand correctly the rod that the Tee handle is on that pushes and pulls the slide has come out of the slide.
If this has happened, find the longest 3-4" coarse threaded screw you can find, turn it into the end of the gate, and gently pull. It should come open for you.
Read this thread from another site, www.irv2.com/forums/f116/black-tank-dump-valve-ka-put-187001.html
Have not been able to get a message posted on Evergreen site. Need help:
My black water exit valve is broken(pin is stripped out with valve closed).
I am looking to purchase a replacement slide. And also a cap to replace the end cover to the outside.
My plans are to cut off the end cap then retrieve the slide by means of possibly drill and tap. then insert a rod to open the slide.
After opening, I will require the replacement parts.
Question; Where to I purchase replacement parts for my problem?
regards
Roland Kuehne
it is a generic part
bring rubber gloves and a bucket of some sort.....its a crappy job!! but takes a small wrench and screwdriver and about a half hour of your time
If this has happened, find the longest 3-4" coarse threaded screw you can find, turn it into the end of the gate, and gently pull. It should come open for you.
Read this thread from another site,
www.irv2.com/forums/f116/black-tank-dump-valve-ka-put-187001.html
Hope it helps.