Not having any luck hooking up my digital tv to the outside antenna. Just purchase the Winggard antenna tried all settings on the tv( 2011)but still no reception at all. Would like any help I could get. Thank you
Jim
Lucky Mike said
03:00 AM Dec 14, 2012
is the TV set to broadcast ant or is it in cable mode?
Lucky Mike said
03:09 AM Dec 14, 2012
I reread your post.......you say you just bought a wingard antenna , is the coax and wiring new....is the antenna installed correct.... is the power on for the amplifier
jjjlafann said
06:12 AM Dec 14, 2012
Thanks for the reply. The antenna was put on by the dealer and the power boost for the antenna is on. Now the wiring I have no clue how old it is I guess I should change it to just to be safe and knock out another possible problem.
Thanks
jjjlafann said
06:13 AM Dec 14, 2012
Antenna
RVRon said
03:15 AM Dec 15, 2012
Have you done a channel search? On our Vizio we can't get anything until we have the TV look for available channels. Also be sure you have the right input selected. Most new TVs now have several options for HDMI or TV coax.
mjlitz said
03:41 AM Dec 15, 2012
Have you changed over on your TV from Cable to Antennae and also turned the button on by the cable. Know this sounds lame but we couldn't figure it out and then we figured out we hadn't changed over the use of the TV from Cable to Antennae and then did a scan of channels. The change over from Cable to Antennae is on the program guide on your controller. Good luck
Thanks for the reply. The antenna was put on by the dealer and the power boost for the antenna is on. Now the wiring I have no clue how old it is I guess I should change it to just to be safe and knock out another possible problem.
Thanks
Antenna
Have you done a channel search? On our Vizio we can't get anything until we have the TV look for available channels. Also be sure you have the right input selected. Most new TVs now have several options for HDMI or TV coax.