can you clean and ajust the spark igniter for a 3 burner stove when you turn the knob they spark but wont light the burners but the burners light fine with a lighter.
Lucky Mike said
01:02 PM Aug 24, 2012
Pilot ports are blocked from spilliage or some type of debri........onthe side od your burner there is 3 little holes(next to the igniter) pull the burner and clean these holes our with a common pin or small needle.....be careful not to enlarge them
this should cure the problem....
hope it works , if not let me know and we can go from there
Howard said
06:16 PM Aug 24, 2012
Thanks for jumping in Lucky Mike. Sorry it took me so long to respond Ranger Guy, but glad everything is working now.
Note: Moved topic from "Ask Howard" to RV Maintenace & Technical Tips.
Ranger guy said
06:32 PM Aug 24, 2012
took the top off the stove around burners to clean ports and found that there is 3 wires on the igniter one goes to each burner put that one wire back on and all burners light fine now thanks for the help.
Ranger guy said
12:25 PM Oct 15, 2012
after fixing the igniter the wife found a new trailer and we traded it in!!!LOL
can you clean and ajust the spark igniter for a 3 burner stove when you turn the knob they spark but wont light the burners but the burners light fine with a lighter.
this should cure the problem....
hope it works , if not let me know and we can go from there
Thanks for jumping in Lucky Mike. Sorry it took me so long to respond Ranger Guy, but glad everything is working now.
Note: Moved topic from "Ask Howard" to RV Maintenace & Technical Tips.