Joan and I took the RV out to a local park for the weekend and invited the grandkids to come along. After a full day of swimming we wanted to dry the towels so they could be used again the next day. This was the first occassion to use the washer/dryer since we bought the RV in August. Read through the user manual and attempted to use the "Dry' cycle. The unit turned on and began to heat up, but would not spin. On our unit there are 3 dry cycles, Tried all 3 with the same result: unit heated up, but no spin. Then tried the Spin Cycle. No luck there either. I could hear the unit doing something, but no Spin.
Any suggestions?
NorCal Dan said
11:11 AM Nov 29, 2010
I assume this is not a new unit so the shipping bolts should not be an issue. Best bet is call Splendide, they are very nice and will help you troubleshoot over the phone. The number I have for them is 800-356-0766.
mktobob said
03:19 PM Nov 29, 2010
I hope this is an easy fix for you. Here is a link to a tech manual that may help. Towards the end of the pdf file you will find troubleshooting tips. Tech Manual
Workinrvers said
09:00 PM Nov 29, 2010
our's did that and the belt had slipped off the pulley. We had taken the unit out and hauled it to Camping World for them to work on. They took the back off and put the belt back in place and presto, good as new.
FOSJ said
06:36 PM Nov 30, 2010
Thanks all for your input. And special thanks to Phil Bob; took the dryer out of the shelf, removed the back and the belt had indeed fallen off the pulley. 15 minutes and we were up and running.
Thanks again.
Any suggestions?
Tech Manual