Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Anderson Fifth Wheel Hitch


RV-Dreams Family Member

Status: Offline
Posts: 35
Date:
Anderson Fifth Wheel Hitch


OK, we now have our fifth wheel, it is a 2016 Bighorn 3570RS, we are getting rid of our too small 2008 Ford F250 6.4L Turbo Diesel and in the market for a (not new, but recent model) Ford F350 6.7L Turbo Diesel Dually.  The Bighorn has a dry weight of 12,800 pounds and a GVWR of 16,000.  Once we have the truck we need a hitch.....I have heard that the Anderson is outselling the "regular" fifth wheel hitches by a large margin (this is from dealers who sell both kinds) but I don't know anyone who actually owns one so I am wondering if anyone out there has an Anderson hitch and can give me "real" feedback on their experience.  Thanks!  Ron

 

 



__________________

2016 Dodge Ram 2500 6.7 Cummins Diesel

2013 Keystone Sprinter



RV-Dreams Family Member

Status: Offline
Posts: 393
Date:

Dented beds, damaged kingpin plates and hitches folding from hard braking even with a re design. IMHO not a good choice, light is not always better.

Best hitch hands down is B&W, just ask those who have owned them.

__________________

2015 RAM/Cummins/Aisin/4.10's/3500Dually

2016 Mobile Suites 39TKSB3 "Highly Elited"

32,950# combined



RV-Dreams Family Member

Status: Offline
Posts: 1122
Date:

I have no experience (other than YouTube) with the Andersen hitch ... but with regard to hitches in general ... this is an area where you actually get what you pay for. I have my favorite brand, others have theirs, but you are unlikely to get a better hitch by paying less. Weight is also an indicator of how robust the hitch is with heavier generally being better (more and thicker steel). This is my $0.02 which may only be worth $0.01😎



-- Edited by RonC on Sunday 24th of December 2017 01:33:01 PM

__________________

Ron and Janice

 

2016 Ford F350, King Ranch, DRW, 4x4, CC, 6.7 PS Diesel, remote control air lift system

2017 Durango Gold 381REF, Lambright furniture, MCD shades, morRYDE IS, 8K Disc brakes, GY G114  LR H Tires, 27,320 lbs CGVW

FT class of 2016



RV-Dreams Family Member

Status: Offline
Posts: 396
Date:

I'll swim upstream here and say that many people (including myself), have pulled tens of thousands of miles with the Andersen (BTW - it is spelled with an "e") Ultimate hitch system. While there are a few documented instances of failure, the exact causes have not been determined with certainty. Most of the negativity about the hitch comes from folks who have never owned or towed with one. The Andersen - and now the very similar PullRite - design has its advantages and disadvantages. You just have to decide what is right for you.

We were forced to switch from the Andersen to a "conventional" fifth wheel hitch when we traded trucks last January. Everything - from being offered the trade to our scheduled departure from the area - happened in about 36 hours. Our RV dealer could not get the frame adapter for the Ford puck system in time for us to keep to schedule so we purchased and installed a PullRite OE 18K for the Ford puck system. After switching, I'll admit that I find it a little bit easier to hitch up by myself. Unhitching is about the same. The Andersen was much quieter and the PullRite requires periodic maintenance and lubrication which the Andersen did not. On the other hand, there's no way the PullRite is coming out of the truck bed (at least not without the help of a couple of high school football players) to clear the bed for other uses. Removing the Andersen was a one-arm job... even for this old man.

There's an old saying about attorneys (also sometimes applied to a particular ethnic group, but I'll skip that): "If you put four attorneys in a room and ask a question, you'll get five answers." In other words, opinions are like certain parts of our anatomy - everybody has one. Read threads (on other forums, too) by those who have actually used the Andersen before you write it off. Having said all this, with a 16K GVWR fifth wheel and your new F350 (and at 16K, I would recommend dual rear wheels), I would probably opt for an 18 - 20K "conventional" fifth wheel hitch - there are a lot of good ones out there.

Rob

__________________

2012 F350 DRW Lariat 6.7

PullRite OE 18K, Demco Glide Ride pinbox

2020 Solitude 310GK-R, MORryde IS, disc brakes, solar, DP windows

Full-time as of 8/2015

 

 



RV-Dreams Family Member

Status: Offline
Posts: 5398
Date:

Personally, I would not go by "what everyone else is buying."  Do "all those people" really know what they were doing, or did they do what everyone else did.

Do the research in what weight each hitch system will handle and look at the "dynamics" of how a hitch works.  For instance, with a normal fifth wheel hitch, does it have "flex" both fore and aft and side to side?  Is there any possibility that you might want to help out someone with a regular pin box by towing their rig?  (I've done this one more than once.)

I've looked at the Andersen system and am not impressed.  For the record, the wife and I have a Reese 22K standard system fifth wheel hitch.  But then, I'm old school.

Terry



__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 393
Date:

I'm with you Terry, the Circus type crush test is literally a joke in their sales video. I am not an Engineer but as a Carpenter/Construction Superintendent for my career I had to understand how to make things stay upright. The fact is the "crush test" has equal pressure placed downward on all 4 support tubes. Real world the force is all over the place. they have re designed the Ultimate once already and I recently saw a post on one that was folded from hard braking, sounded like it was a slow maneuver and possible the emergency cable was activated.

The base sets on the trucks bed and for a FACT the base causes truck bed deflection when towing heavier.

There is no way that I have seen to lock the hitch to the kingpin to keep A-holes at bay. Yes there are jerks out there that pull locking handles.

Remember Craftsman Shop Vacs "develop" 6 hp. That is a "rating". To claim what they do is a JOKE IMHO. I think it can be used I'm much lighter applications.

Lighter is NOT always better!

__________________

2015 RAM/Cummins/Aisin/4.10's/3500Dually

2016 Mobile Suites 39TKSB3 "Highly Elited"

32,950# combined



RV-Dreams Family Member

Status: Offline
Posts: 38
Date:

I have an Andersen Ultimate 2 in the bed of a 2017 F350 long bed dually. It was in a 2015 F250 short bed before that.

The advantages I found are 1) absolutely no need for a slider (on the short bed F250), 2) it weighs about 35 lbs. and I can lift it out easily myself, 3) zero grease needed, 4) no chucking.

It is rated for 21K. I am hauling a 15K trailer and have had zero issues. Very easy to hook/unhook.

Disadvantage: you have to raise and lower the landing gear more to get it on/off compared to standard fifth wheel hitch.

I'd never go back. Just my 2 cents 



__________________

2017 Ford F350 Platinum, SuperCrew, Diesel, DRW | 2014 Palomino Sabre | Andersen Ultimate 2 Hitch

"I spent most of my money on alcohol, women and RV's . . . the rest I just wasted . . ."



RV-Dreams Family Member

Status: Offline
Posts: 393
Date:

I assume you are placing the pin behind the rear axle. NOT a good idea to remove front axle weight.

__________________

2015 RAM/Cummins/Aisin/4.10's/3500Dually

2016 Mobile Suites 39TKSB3 "Highly Elited"

32,950# combined



RV-Dreams Family Member

Status: Offline
Posts: 396
Date:

Cummins12V98 wrote:

I assume you are placing the pin behind the rear axle. NOT a good idea to remove front axle weight.


We had our Andersen with the ball both forward of and behind the rear axle (it's actually only a couple of inches either way). On the scales, it made a grand total of 100 lbs. difference in the front axle weight.

Rob



__________________

2012 F350 DRW Lariat 6.7

PullRite OE 18K, Demco Glide Ride pinbox

2020 Solitude 310GK-R, MORryde IS, disc brakes, solar, DP windows

Full-time as of 8/2015

 

 



RV-Dreams Family Member

Status: Offline
Posts: 38
Date:

Second Chance wrote:
Cummins12V98 wrote:

I assume you are placing the pin behind the rear axle. NOT a good idea to remove front axle weight.


We had our Andersen with the ball both forward of and behind the rear axle (it's actually only a couple of inches either way). On the scales, it made a grand total of 100 lbs. difference in the front axle weight.

Rob


 Same here, it was a matter of a few inches, I can't say I noticed any difference although I understand what you are saying. 



__________________

2017 Ford F350 Platinum, SuperCrew, Diesel, DRW | 2014 Palomino Sabre | Andersen Ultimate 2 Hitch

"I spent most of my money on alcohol, women and RV's . . . the rest I just wasted . . ."



RV-Dreams Family Member

Status: Offline
Posts: 100
Date:

If the Andersen design was so great why isn't the trucking industry using it, I will stay with the tried and true fifth wheel design with the king pin and plate. I have never heard of a king pin shearing off during an accident.

__________________

2005 Cedar Creek 30RLBS/RV Flex Armour Roof / MORryde Independent Suspension/ Disc Brakes

2015 RAM 3500 DRW Cummins 3.42/Garmin RV760

 



RV-Dreams Family Member

Status: Offline
Posts: 38
Date:

I suppose anything can and does fail in an accident. The gooseneck method has been used for years in the farming/horse trailer industry. Both have their advantages and disadvantages. Andersen is a new method of using the old gooseneck and could be why you haven't seen it used much in trucking yet. Plus in trucking you deal with 80,000 GCWR, not 30,000. PullRite is adding the same concept to their lineup now too http://www.pullrite.com/products/isr-series-superlite-industry-standard-rails/isr-series-superlite-four-point-4p-rail 

I'm not arguing a person should use a particular hitch. Use what works for you or what you feel comfortable with. One thing it does for sure is eliminates the need for a slider on a short bed (at least with my F250 with my Sabre 5er). That gets rid of extra weight/hassel/$$, all of which mattered to my old situation.

This was a regular fifth wheel setup at the I-76 @ Rt 15 interchange in Mechanicsburg, PA last year. I'm sure the attachment method had nothing to do with the crash itself, but it failed.

20170726_1002151_zpsc8wp7pwo.jpg



__________________

2017 Ford F350 Platinum, SuperCrew, Diesel, DRW | 2014 Palomino Sabre | Andersen Ultimate 2 Hitch

"I spent most of my money on alcohol, women and RV's . . . the rest I just wasted . . ."



RV-Dreams Family Member

Status: Offline
Posts: 38
Date:

Sorry, I forgot about the Photobucket thing . . .

Here's a link to it  

 



__________________

2017 Ford F350 Platinum, SuperCrew, Diesel, DRW | 2014 Palomino Sabre | Andersen Ultimate 2 Hitch

"I spent most of my money on alcohol, women and RV's . . . the rest I just wasted . . ."



RV-Dreams Family Member

Status: Offline
Posts: 1661
Date:

Zeek... Maybe not failed, trailer could have been "top locked" (which is not a failure of the equipment but the person hooking it up). Picture doesn't really show any potential causes only the outcome. What's unsaid tells volumes.

 



-- Edited by BiggarView on Wednesday 14th of February 2018 10:34:45 AM

__________________

Brian, Cindi & Josie (our fur baby)
2017 RAM 3500 Laramie 4x4 CCLB, CTD, Aisin, B&W hitch, dually
2020 Keystone Montana Legacy 3813MS w/FBP ,
MORryde 8k IS, Kodiak disc brakes, no solar  YET!



RV-Dreams Family Member

Status: Offline
Posts: 38
Date:

It was kind of sickening to see . . . I felt terrible for them. My assumption was speed, but it could have been a blowout as well, who knows. The ramp is one of those that kind of "get tighter as you go" ones. Anyway, let's all be safe (and not them)no



__________________

2017 Ford F350 Platinum, SuperCrew, Diesel, DRW | 2014 Palomino Sabre | Andersen Ultimate 2 Hitch

"I spent most of my money on alcohol, women and RV's . . . the rest I just wasted . . ."



RV-Dreams Family Member

Status: Offline
Posts: 1122
Date:

Zeek ... love your avatar ...

__________________

Ron and Janice

 

2016 Ford F350, King Ranch, DRW, 4x4, CC, 6.7 PS Diesel, remote control air lift system

2017 Durango Gold 381REF, Lambright furniture, MCD shades, morRYDE IS, 8K Disc brakes, GY G114  LR H Tires, 27,320 lbs CGVW

FT class of 2016



RV-Dreams Family Member

Status: Offline
Posts: 38
Date:

Thanks! I have been using that for years on another forum related to antique tractors and for some reason people remember that when I meet them in person, so I stuck with it.

__________________

2017 Ford F350 Platinum, SuperCrew, Diesel, DRW | 2014 Palomino Sabre | Andersen Ultimate 2 Hitch

"I spent most of my money on alcohol, women and RV's . . . the rest I just wasted . . ."

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us