Hi Everyone. Well, after 15 years the RV-Dreams Community Forum is coming to an end. Since it began in August 2005, we've had 58 Million page views, 124,000 posts, and we've spent about $15,000 to keep this valuable resource for RVers free and open. But since we are now off the road and have settled down for the next chapter of our lives, we are taking the Forum down effective June 30, 2021. It has been a tough decision, but it is now time.


We want to thank all of our members for their participation and input over the years, and we want to especially thank those that have acted as Moderators for us during our amazing journey living and traveling in our RV and growing the RV-Dreams Family. We will be forever proud to have been founders of this Forum and to have been supported by such a wonderful community. Thank you all!!

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Bicycle Rack for rear of 5th Wheel? Any recommendations/suggestions/ideas


RV-Dreams Community Member

Status: Offline
Posts: 13
Date:
Bicycle Rack for rear of 5th Wheel? Any recommendations/suggestions/ideas


I'm looking for a rack to fit the 2" receiver on the rear of my 5th wheel. I don't need to carry more than 2 bikes. Prefer a rack that will accommodate a man's and woman's bike. Several I've read about do not work well with frames that have a sloped top tube.

Any input is going to be helpful.

Thanks

Eric 



__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Family Member

Status: Offline
Posts: 393
Date:

Swagman XTC2

__________________

2015 RAM/Cummins/Aisin/4.10's/3500Dually

2016 Mobile Suites 39TKSB3 "Highly Elited"

32,950# combined



RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

Thank you that is one brand I am considering.

Appreciate the help.



__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Family Member

Status: Offline
Posts: 396
Date:

Cummins12V98 wrote:

Swagman XTC2


X2 ^^. Swagman has two models that are RV "certified," meaning they can withstand the forces at the back of an RV. Just make sure to mount the bike rack on a frame-mounted receiver - not a clamp-on receiver bolted to a bumper. Those are a good way to drag your bikes down the road on the asphalt.

Rob



__________________

2012 F350 DRW Lariat 6.7

PullRite OE 18K, Demco Glide Ride pinbox

2020 Solitude 310GK-R, MORryde IS, disc brakes, solar, DP windows

Full-time as of 8/2015

 

 



RV-Dreams Family Member

Status: Offline
Posts: 813
Date:

I got this Thule from Amazon…been on the rear of the rig with 2 bikes all the way to Alaska and back with no issues. I carry my road bike and my wife's hybrid quite nicely.

https://www.amazon.com/gp/product/B000CQ47H4/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

if you want a cover…get one without zippers as they do tend to get dust into their teeth and the zippers are plastic and not of the highest quality. I started with a zippered one and moved on to this one instead. I just put a couple of bungees around it to hold down on the flapping…but then I did that with the zippered one I had before as well.

https://www.amazon.com/gp/product/B01C7JM7CU/ref=oh_aui_search_detailpage?ie=UTF8&psc=1

I've often wondered about that whole RV-certified thing. Assuming you get a carrier that fits into a regular frame mounted receiver and not one that attaches to the bumper…then as a recovering engineer I think that RV-certified is a load of hooey. The bike rack doesn't know whether the receiver it's mounted on is attached to the frame of a car/truck or the frame of an RV…and if it's not safe to attach to an RV receiver then it's not safe to attach to a receiver on a car/truck either. I've seen the claims that it "bounces more" on the back of an RV and found that the rear of our RV doesn't bounce any more than a car does. There isn't much difference…if any…in the forces that the bike/rack combination put on the receiver on the back of the rig and those on the receiver on the back of a car/truck.

We do have a 2 inch receiver on our rig…I would suggest one of those rather than the smaller ones.



__________________


RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

Neil,

Thanks for the valuable information and links. If you would give me an email address or phone to text to, I'd

like to send you some photos of where and how it will be attached and get an engineer's opinion about the set up.

Thank You,

Eric



__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

Second Chance

Thank you for the information. I was not aware there were "RV approved" racks. I've read several comments about Swagman mounts and some are not very favorable.

I don't want to spend a fortune to carry the bike however, I want a mount that will not allow the bike to fall off either. 

The 5th Wheel has a frame mounted receiver. The original bumper was removed and replaced with 4" sq. tubing with .250 wall thickness. A custom cargo carrier was made to 

go into the 2" receiver and is also supported at both ends with 2" sq tubing. Another 2" receiver was mounted on the rear of the cargo carrier just for a bike rack. I've got some 

pictures but not sure hot to post them here.

Thanks Again for the help.

Eric



-- Edited by ka0dqz on Tuesday 21st of February 2017 08:02:31 PM

__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Family Member

Status: Offline
Posts: 654
Date:

We have had 2 bike rack failures on the back of our 5th wheel using "RV" approved racks, one Rola and one Swagman. Rola reimbursed us the cost of their rack and paid us $250 to fix the damage to our bikes. We then bought a Swagman - sorry don't remember the model but it cost about $200 - and when it failed, then sent us a new heftier one - the one that costs about $300 - and sent a check for $1000 to replace the bikes, which were a total loss after being dragged for many many miles on the Tok Cutoff in AK.

What Bill came to realize is the biggest problem we had was the hitch - the bar that the receiver is attached to was not strong enough and allowed too much bounce and we now believe that's what caused (at least contributed to) the failures.

Bill had extra pieces of square tubing (1/4") welded to the hitch to strengthen it - and uses an anti-rattle clip where the rack sits in the receiver, which helps there.

So - I would recommend checking the hitch itself and determine if it is hefty enough. Our original hitch was rated for up to 150 pounds and we never had more than 110 on it.

Good luck in your decision.

__________________

Bill & Kelly - with Callie along the ride.  

2011 Ford F350 Diesel Dually 4x4 

2014 Heartland Landmark, Grand Canyon 

"All those who wander are not lost" Tolkien

 BLOG:  http://bkamericanodyssey.com/



RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

Bill & Kelly,

Thank you very much for the information. I was looking at the Swagman XTC2 at a local shop last week and the 1 1/4" bar seemed to be a weak spot to me.

The hitch on the 5th wheel is rated for several thousand pounds. Right now I only have 1 bike to carry. The XTC 2 seems to be a heavier duty version of another 

carrier by Swagman. It supports both wheels and has down pressure on the top tube. It seems like almost every brand has had failures that caused bikes to be destroyed.

Makes the choice very difficult.

Thanks again

Eric



__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Family Member

Status: Offline
Posts: 207
Date:

ka0dqz wrote:
... It seems like almost every brand has had failures that caused bikes to be destroyed.

Makes the choice very difficult.

..

If it is helpful we purchased a Thule's hitch mounted bike rack in 2003 (pre-RVing) and it is still going strong (i.e., we are using it on the RV). The following is a link to Thule's current hitch mounted offerings: https://www.thule.com/en-us/us/bike-rack/hitch-bike-racks?q=MTDWKcuqv

 



__________________

2014 New Horizons Majestic 40'
2014 Ram 5500 HD with Utility Bodywerks hauler body

Enjoying this chapter in our lives!!!



RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

Lynn & Ed,

Thank you for the information. Is the model you have still in production? 

Eric



__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Family Member

Status: Offline
Posts: 207
Date:

ka0dqz wrote:

Lynn & Ed,

Thank you for the information. Is the model you have still in production? 

Eric


Eric,

Our specific rack is no longer made, looking at pictures on Thule's website it looks most similar to the Vertex. I would assume any of their bike rack would be good, based upon our past experience.

Lynn



__________________

2014 New Horizons Majestic 40'
2014 Ram 5500 HD with Utility Bodywerks hauler body

Enjoying this chapter in our lives!!!



RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

Thank you Lynn. This information will help.

Eric



__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Family Member

Status: Offline
Posts: 813
Date:

Sent you a PM with contact info.

 



__________________


RV-Dreams Community Member

Status: Offline
Posts: 17
Date:

We ordered -Swagman Bicycle Carriers Chinook 2 Carrier Platform Hitch Rack - from Amazon. We love how it adjusts to any size bike and locks both bikes on the rack as well as a lock on the hitch.  The tires ride on a quarter shelf which make the whole rack more stable. We would order again. 



__________________

Jeff, Gwen and Bella

2017 DRV Mobile Suites 40 KSSB4

2012 DRV Mobile Suites 36 RSSB3 (sold)

2011 Ford F450 (BO)

2013 Ford F150 (Red)

Cargo Trailer for Gold Wing, Golf Clubs, Bicycles and Cast Iron Soup Pot!

 



RV-Dreams Family Member

Status: Offline
Posts: 50
Date:

Decided to go with the Swagman Dispatch model after talking to them on the phone. All the previous racks will work fine, as long as you go with the 2" base mount and watch the weight ratings. This was the reason I called, since their website states the Dispatch model is rated for 45 lbs. / bike and Amazon stated 35/bike for the same model. A lot of the other models are rated for 35 lbs / bike. My bike, and my wife's bike, weigh 35 lbs. each. We both have heavy "Cruiser" style bikes. I guess having an RV has made me pay more attention when it comes to weight ratings!

www.swagman.net/products/rv-racks/

Did you ever notice how we all seem to go "full circle" as we age? We are very young and start with a trike, then we get older and get the 2 wheel (back in my day it was the banana bike), then the cruiser bike, then the racing style bikes, mountain bikes, hybrids, and then back to a cruiser bike, and then the trike again. LOL.

__________________

Bruce & Robin

2013 GMC Sierra 3500HD SLT DRW 4x4 CC

2014 DRV Mobile Suites 38TKSB3 

Full Timers - March 2017

Our Blog at https://rv-revelations.blog/



RV-Dreams Family Member

Status: Offline
Posts: 786
Date:

There's bicycles and there's bicycles. Most RVers idea of a bicycle weights 30 to 35 pounds each...including basket, horn, fenders and water bottle. What is the rating on this 2 inch receiver?



-- Edited by LarryW21 on Wednesday 26th of April 2017 06:45:42 PM

__________________

Winnebago TT 2101DS & 2020 Silverado LTZ Z71. 300 watts WindyNation solar w/MPPT, 2 Trojan T-125s. TALL flag pole. Prefer USFS, COE, BLM, USF&WS, NPS, TVA, state/county camps. 14 year Army vet-11B40 then 11A - old MOS 1542 & 1560.



RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

It's a std 2" receiver, so it should have a tongue weight of 5,000lb



__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Family Member

Status: Offline
Posts: 786
Date:

"It's a stardard 2" receiver, so it should have a tongue weight of..."

Famous last words of a famous old RVer.

__________________

Winnebago TT 2101DS & 2020 Silverado LTZ Z71. 300 watts WindyNation solar w/MPPT, 2 Trojan T-125s. TALL flag pole. Prefer USFS, COE, BLM, USF&WS, NPS, TVA, state/county camps. 14 year Army vet-11B40 then 11A - old MOS 1542 & 1560.



RV-Dreams Family Member

Status: Offline
Posts: 50
Date:

LarryW21 wrote:

There's bicycles and there's bicycles. Most RVers idea of a bicycle weights 30 to 35 pounds each...including basket, horn, fenders and water bottle. What is the rating on this 2 inch receiver?



-- Edited by LarryW21 on Wednesday 26th of April 2017 06:45:42 PM


 Good one! LOL  The receiver isn't ever the issue. It's the 1"1/4 reduced box tubing they use for the rack on most bike racks. Either the place where the vertical tube attaches or the horizontal length breaks. 

 

The Swagman "Dispatch" is a 2" box steel and rated for 45 lbs per bike and it is a 2 bike - rack. We will see if it lasts. Only time will tell....



__________________

Bruce & Robin

2013 GMC Sierra 3500HD SLT DRW 4x4 CC

2014 DRV Mobile Suites 38TKSB3 

Full Timers - March 2017

Our Blog at https://rv-revelations.blog/



RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

I was looking at the Swagman XTC2 and that was my concern. The 1 1/4 hollow tubing and the 2" adapter. 

I decided that a 2" tube was what is needed. So I was considering the S64663 platform mount but, I don't

need that bumper adapter and that rack can't be ordered without it. 

I'll need to look more closely at the dispatch.

Another thought was to replace the 2" hollow tube with a piece of 2" solid steel.

Thank you for the information

 



__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013



RV-Dreams Family Member

Status: Offline
Posts: 5398
Date:

ka0dqz wrote:

It's a std 2" receiver, so it should have a tongue weight of 5,000lb


 

I feel the need to comment on this, even though the weight of the bicycles comes nowhere near the capacity of the 2" receiver.  We had a 2" receiver added to the rear of our Mobile Suites.  Its capacities are 300 lbs tongue weight and 5000 lbs towing weight.

Terry



__________________

Terry and Jo

2010 Mobile Suites 38TKSB3
2008 Ford F450
2019 Ford Expedition Max as Tag-along or Scout

Our photos on Smugmug



RV-Dreams Family Member

Status: Offline
Posts: 25
Date:

We have been using the Bell Right Up 200 for 4 years with good luck.  Works on the F350 as well as our 5th wheel.



__________________

Leonard, Sally & Sprocket

2014 MS 36RSSB3 2013 F-350

http://where-rv-going.blogspot.com/



RV-Dreams Community Member

Status: Offline
Posts: 13
Date:

Thanks to everyone for the feedback and the results of what has and has not worked well.
I appreciate your time and effort. I'm going to investigate what it would cost to start with a 2" solid shank and
use components from manufacturers to build my own.

__________________

Eric

2005 International 9400i Cummins ISX

2015 Wildwood Heritage Glen 327RES

Full Timing Since - July 2013

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us